Taylorsville Foundation Pros
Patio Lifting in Taylorsville, UT
Patio lifting in Taylorsville with polyurethane foam injection, free estimates, and same-day leveling for sunken slabs.
Serving Taylorsville and nearby communities.
A settled patio slab usually isn't a drainage problem on its own, it's a sign the soil underneath has compacted or washed out after seasonal moisture moved through it. Taylorsville Foundation Pros lifts sunken patio sections with polyurethane foam injection instead of tearing out and repouring concrete, which keeps your landscaping and patio furniture setup intact.
Taylorsville's mix of clay and sandy soils settles unevenly once spring runoff saturates the ground beneath a slab, and a patio poured decades ago often has more voids underneath than it looks like from the surface. Foam injection fills those voids and raises the slab back to grade without the mess of demolition.
Materials
Materials and methods for Patio Lifting
We use lightweight, expanding foam systems matched to pedestrian-load slabs, not the heavier mix used under driveways.
Polyurethane Foam
Lifts patio slabs with minimal disruption to surrounding landscaping, and it won't wash out the way loose fill can after a wet Utah spring.
Patch Compound
Fills and finishes drilled access holes smoothly so the repair blends into the existing surface.
Joint Filler
Restores expansion joints after the lifting process, keeping the slab able to move with freeze-thaw cycles.
Surface Sealant
Guards the patio against moisture and surface wear through another Wasatch Front winter.
Leveling Tools
Used to verify consistent elevation across the patio before we call the job finished.
Bonding Agent
Enhances adhesion between patch material and existing concrete so patched holes don't crack out later.
Questions on materials?
Get a Free EstimateHow it works
How our Patio Lifting process works
Step 1Patio Assessment
Uneven or settled patio sections are identified for repair.
Step 2Access Point Drilling
Small holes are made at key points across the patio surface.
Step 3Foam Injection
Expanding material is injected to raise the settled sections.
Step 4Level Verification
Elevation is checked throughout the lifting process for accuracy.
Step 5Hole Patching
Access points are filled and smoothed to match the patio surface.
Step 6Final Walkthrough
The patio is inspected to confirm a level, stable finish.
Timeline
How long does patio lifting take?
Most patio lifting jobs wrap up in a single visit since foam cures fast and doesn't need days to set.
- 01
Consult and measure
same day - 02
Foam injection and lift
a few hours
- 03
Patch cure before foot traffic
same day
Need a schedule that fits?
Get a Free EstimateWhat's included
What's included with Patio Lifting
Typically included: slab inspection, access drilling, foam injection, hole patching, and a level check before we leave.
Optional: joint resealing on adjacent sections and a surface sealant coat for extra moisture protection.
Customer prep: clear patio furniture and potted plants off the slab before the crew arrives.
Want a clearer scope?
Get a Free EstimateCodes & permits
Permits and codes for Patio Lifting
Check with Taylorsville or Salt Lake County before scheduling if your patio has any attached structure, since permit rules vary by project scope.
| Typically needs a permit | Often no permit |
|---|---|
| Patio structures tied into an attached covered roof or pergola addition | Lifting an existing freestanding patio slab back to its original grade |
| — | Foam injection work that doesn't alter the slab's footprint or height beyond original level |
Need help with permits?
Get a Free EstimateCost
What does patio lifting cost in Taylorsville?
Price depends mostly on slab size and how deep the voids underneath run, not a flat per-square-foot rate. Get a free estimate and we'll walk the slab with you before quoting a number.
| Project type | Typical range | What’s included |
|---|---|---|
| Small patio section | $300–$800 | single slab or walkway segment with minor settling. |
| Full patio slab | $800–$2,000 | standard backyard patio with moderate void fill. |
| Large or multi-section patio | $2,000–$4,000 | larger entertaining spaces or patios with several settled panels. |
These are typical local ballparks — final cost depends on scope, materials, and site conditions. A free estimate gives you an accurate, itemized number for your home.
Want a number for your home?
Get a Free EstimateDIY vs pro
DIY vs hiring a pro for Patio Lifting
| DIY | Hire a pro |
|---|---|
| Rental foam kits exist for small cosmetic gaps or minor edge settling | Uneven slope after a DIY lift can send water back toward the house instead of away from it |
| Fine for a single hairline crack with no real height difference between panels | Pressure-controlled injection equipment lifts evenly across the whole slab instead of creating a new high spot |
| — | A pro checks drainage direction as part of the lift, then confirms the height matches the rest of the slab |
Not sure DIY vs pro?
Get a Free EstimateWhen to call
When to call for Patio Lifting
Call Taylorsville Foundation Pros or request a free estimate and we'll tell you honestly whether it's a lift job or something bigger.
- Water pools on the patio instead of draining away after rain or snowmelt
- Pavers or slab edges have separated or created a trip hazard
- One section of the patio has visibly dropped compared to the rest
Seeing warning signs?
Get a Free EstimateFAQs
Patio Lifting FAQs
How much does patio lifting cost in Taylorsville?
Most jobs run $300 to $4,000 depending on slab size and how much void space needs filling. A free estimate gives you an exact number for your patio.
How long does patio lifting take?
Most patios are lifted and walkable the same day. The foam expands and sets within minutes, with full cure happening over the following hours.
Do I need a permit for patio lifting?
Lifting an existing freestanding patio slab usually doesn't need a permit. If your patio has an attached roof or structure, check with Salt Lake County first.
Is DIY patio lifting a good idea?
Rental foam kits can handle small cosmetic settling, but getting the slope right so water drains away from the house takes pressure control most homeowners don't have access to.
What causes a patio to sink in the first place?
Soil beneath the slab compacts or washes out over time, especially after spring snowmelt saturates the ground. Clay and sandy soil mixes common in Taylorsville settle unevenly.
Will the patch holes be visible after the repair?
The patch compound is matched and finished to blend with the surrounding slab, though very old or weathered concrete may show a slight color difference.
Can patio lifting fix drainage problems too?
Part of the process includes correcting the slope so water moves away from the foundation instead of pooling on the patio surface.
More services
Other Foundation Repair services
Foundation Repair
Foundation repair in Taylorsville with crack injection, piering, and wall stabilization backed by free estimates.
Piering and Underpinning
Steel push pier and helical pier underpinning in Taylorsville, UT. Engineered lift and stabilization with free estimates.
Wall Stabilization
Bowing basement wall repair in Taylorsville, UT with steel anchors, I-beams, and carbon fiber straps. Free estimates available.
Ask about Patio Lifting
Tell us about the project and how to reach you.