Taylorsville Foundation Pros
Foundation Crack Repair in Taylorsville, UT
Epoxy and polyurethane foundation crack injection in Taylorsville, UT. Structural diagnosis before repair, free estimates.
Serving Taylorsville and nearby communities.
Is the crack in your foundation just cosmetic, or is it something more? That's the first question Taylorsville Foundation Pros answers before quoting a repair. Clay and sandy soil across the Salt Lake Valley shifts with moisture, and that movement produces both hairline cosmetic cracks and active structural cracks that widen over time.
We don't treat every crack the same. A straight vertical crack that's stable gets a different repair than a stair-step crack over a window, and we use epoxy or polyurethane injection depending on whether the goal is structural bonding or water sealing.
What's included
What's included with Foundation Crack Repair
Typically included: crack inspection, surface cleaning, injection port setup, and epoxy or polyurethane injection along the full crack length. Optional: exterior grading or drainage correction if moisture is the main driver of the crack reopening. Customer prep: clear the area near the crack (boxes, shelving) so we have full access to the wall or slab surface.
Want a clearer scope?
Get a Free EstimateHow it works
How our Foundation Crack Repair process works
Step 1Crack Inspection
Each crack is examined to determine type, width, and cause.
Step 2Surface Cleaning
Debris and loose material are removed from the crack area.
Step 3Injection Port Setup
Ports are installed along the crack to allow material injection.
Step 4Sealant Injection
Epoxy or polyurethane is injected to fill and bond the crack.
Step 5Surface Finishing
Excess material is removed and the surface is smoothed.
Step 6Final Inspection
The repair is checked to confirm a watertight and stable seal.
Materials
Materials and methods for Foundation Crack Repair
Which resin we use depends on whether the crack is structural or simply letting water through.
Epoxy Injection Resin
Bonds structural cracks for added strength, used when the crack affects load-bearing integrity.
Polyurethane Foam Sealant
Expands to fill cracks and block water infiltration, suited to active leaks after snowmelt.
Injection Ports
Allow controlled delivery of sealant into the crack cavity at consistent pressure.
Surface Primer
Prepares concrete surfaces for proper material adhesion before injection.
Masonry Patch Compound
Used to finish and blend the repaired surface with surrounding concrete.
Protective Topcoat
Applied to shield the repaired area from future moisture exposure.
Questions on materials?
Get a Free EstimateTimeline
How long does foundation crack repair take?
- 01
Stage 1
same-dayMost single-crack injection jobs are a repair, with larger or multiple cracks taking a bit longer.
- 02
Consult and crack diagnosis
same day - 03
Injection and sealing
a few hours per crack.
- 04
Surface finishing and cure
same dayfor most jobs.
Need a schedule that fits?
Get a Free EstimateBefore & after
Before and after Foundation Crack Repair
Before 
After
FAQs
Foundation Crack Repair FAQs
How do I know if my crack is structural or cosmetic?
Hairline vertical cracks under about 1/8 inch that aren't growing are usually cosmetic. Stair-step cracks, cracks over 1/4 inch wide, or cracks paired with sticking doors point to structural movement.
How much does foundation crack injection cost in Taylorsville?
Cost depends on crack length, access, and whether it's a cosmetic seal or a structural repair. We provide a written range at the free inspection.
Can I sell my house with an unrepaired foundation crack?
You can, but most buyers and inspectors flag it, and it often becomes a negotiation point. Sealing it before listing avoids that back-and-forth.
Do I need a permit for crack injection?
A simple injection repair on an existing crack usually doesn't need a permit in Taylorsville. Structural cracks tied to settlement that require piers are a different story.
Is epoxy or polyurethane better for my crack?
Epoxy bonds the crack structurally and is the right call when the wall needs strength restored. Polyurethane expands and flexes, which works better for stopping active water leaks.
Will the crack come back after repair?
A properly injected crack won't reopen on its own, but if the underlying settlement or drainage issue isn't addressed, a new crack can form nearby.
Next step
Get a Foundation Crack Repair estimate in Taylorsville
Call (435) 518-2423 or request a free estimate and we'll tell you honestly whether your crack needs injection or something more.
More services
Other Foundation Repair services
Foundation Repair
Foundation repair in Taylorsville with crack injection, piering, and wall stabilization backed by free estimates.
Piering and Underpinning
Steel push pier and helical pier underpinning in Taylorsville, UT. Engineered lift and stabilization with free estimates.
Wall Stabilization
Bowing basement wall repair in Taylorsville, UT with steel anchors, I-beams, and carbon fiber straps. Free estimates available.
Ask about Foundation Crack Repair
Tell us about the project and how to reach you.